YachtDatabase.com

Review of Absolute 55 Fly


Basic specs.

sail specifications
The Absolute 55 Fly is a large motorboat designed in the early 2010. The Absolute 55 Fly is built by the Italian yard Absolute SpA.

Here we would have liked to show you nice photos of the Absolute 55 Fly.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find an Absolute 55 Fly or similar boat for sale

Hull

Both the hull and the deck is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.


Interior

The boat is equipped with 560.0 liter fresh water capacity.


Engine

The Absolute 55 Fly has been equipped with different engine alternatives.

Alternative 1:

The boat may be equipped with dual Volvo Penta D6-IPS900 engines at 690 hp (514 kW)..

The transmission is a Z-drive aka sterndrive.

Alternative 2:

Absolute 55 Fly may be equipped with dual Volvo Penta D6-IPS800 engines at 590 hp (440 kW)..

The transmission is a Z-drive aka sterndrive.

Alternative 3:

The boat may be equipped with dual Volvo Penta D6-IPS600 engines at 428 hp (319 kW)..

The transmission is a Z-drive aka sterndrive.

Alternative 4:

The boat may be equipped with nummerous Volvo Penta D6-IPS600 engines at 428 hp (319 kW)..

The transmission is a Z-drive aka sterndrive.

The fuel tank has a capacity of 1700.0 liters (449 US gallons, 373 imperial gallons).


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

EU classification

Absolute 55 Fly holds a CE certification:

The boat is by European Union certified as Class B. OFFSHORE:
Designed for offshore voyages where conditions up to, and including, wind force 8 (Beaufort scale) and significant wave heights up to, and including, 4 m may be experienced.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Absolute 55 Fly is about 518 kg/cm, alternatively 2904 lbs/inch.
Meaning: if you load 518 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 2904 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Absolute 55 Fly is 3.58.

Wide Slim 58% 0 50 100
Compared with other similar motor boats it is slimmer than 58% of all other designs. It seems that the designer has chosen a slightly more speedy hull design.


Curiosities

Powerboat?

In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:

Equation for Danish definition of a powerboat
Danish definition of a powerboat
According to this definition this boat is categorized as a Powerboat.


Maintenance

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Absolute 55 Fly it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References