Review of Monte Carlo 6S

Basic specs.

The Monte Carlo 6S aka MC 6 is a large motorboat designed by the maritime architect bureau Nuvolari & Lenard.

Here we would have liked to show you nice photos of the Monte Carlo 6S.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Monte Carlo 6S or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.

Interior

The boat is equipped with 800.0 liter fresh water capacity.

Engine

The boat may be equipped with dual inboard Cummins QSC 8.3 Zeus diesel engines at 1200 hp (894 kW).

The fuel tank has a capacity of 2200.0 liters (581 US gallons, 483 imperial gallons).

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

EU classification

Monte Carlo 6S holds three CE certifications:

If less than 14 in on board the boat is by European Union certified as Class B. OFFSHORE:

Designed for offshore voyages where conditions up to, and including, wind force 8 (Beaufort scale) and significant wave heights up to, and including, 4 m may be experienced.

If less than 16 in on board the boat is by European Union certified as Class C. INSHORE:

Designed for voyages in coastal waters, large bays, estuaries, lakes and rivers where conditions up to, and including, wind force 6 (Beaufort scale) and significant wave heights up to, and including, 2 m may be experienced.

If less than 16 in on board the boat is by European Union certified as Class D. SHELTERED WATERS:

Designed for voyages on sheltered coastal waters, small bays, small lakes, rivers and canals when conditions up to, and including, wind force 4 (Beaufort scale) and significant wave heights up to, and including, 0,3 m may be experienced, with occasional waves of 0,5 m maximum height, for example from passing vessels.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Monte Carlo 6S is about 599 kg/cm, alternatively 3359 lbs/inch.
Meaning: if you load 599 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 3359 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Monte Carlo 6S is 3.27.

Compared with other similar motor boats it is more spacy than 73% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.

Curiosities

Powerboat?

In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:

Danish definition of a powerboat

According to this definition this boat is categorized as a Powerboat.

Maintenance

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.

Finally

We are always looking for new photos. If you can contribute with photos for Monte Carlo 6S it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.

References

[Ref 1]: ISO 8666 Small craft — Principal data.
[Ref 3]: ISO 12215-5 Small craft — Hull construction and scantlings.