The boat is equipped with a galley, 240.0 liter fresh water capacity and toilet facility.
The boat may be equipped with dual inboard MerCruiser 502 Magnum engines at 840 hp (625 kW). The speed is 42.0 knots.
The fuel tank has a capacity of 1000.0 liters (264 US gallons, 219 imperial gallons).
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Windy 11.600 is about 270 kg/cm, alternatively 1514 lbs/inch.
Meaning: if you load 270 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 1514 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Windy 11.600 is 3.33.
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Windy 11.600 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.