Review of Swan 56
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find a Swan 56 or similar boat for sale
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.
The Swan 56 has been built with different keel alternatives.
Deep keel
The Swan 56 is equipped with a deep keel. A deep keel provide a better healing moment than a shallow keel.
The boat can only enter major marinas as the draft is about 3.38 - 3.48 meter (11.09 - 11.39 ft) dependent on the load.
Unknown keel type
The boat can only enter major marinas as the draft is about 2.70 - 2.80 meter (8.86 - 9.16 ft) dependent on the load.
Swan 56 may be equipped with an inboard Yanmar 4JH2-UTBE diesel engine at 96 hp (71 kW).
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
Sorry, we have no sailing characteristics available for this boat.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
Sorry, we do not have sufficient statistical information available for this boat to provide a significant reliable analysis.
Maintenance
Dimensions of sail.
Are your sails worn out? You might find your next sail here: Sails for Sale
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
| Usage | Length | Diameter | ||
| Mainsail halyard | 52.0 m | (170.8 feet) | 14 mm | (0.55 inch) |
| Jib/genoa halyard | 52.0 m | (170.8 feet) | 14 mm | (0.55 inch) |
| Spinnaker halyard | 52.0 m | (170.8 feet) | 14 mm | (0.55 inch) |
| Jib sheet | 17.2 m | (56.4 feet) | 16 mm | (5/8 inch) |
| Genoa sheet | 17.2 m | (56.4 feet) | 16 mm | (5/8 inch) |
| Mainsheet | 43.0 m | (141.0 feet) | 16 mm | (5/8 inch) |
| Spinnaker sheet | 37.8 m | (124.1 feet) | 16 mm | (5/8 inch) |
| Cunningham | 6.6 m | (21.8 feet) | 14 mm | (0.55 inch) |
| Kickingstrap | 13.3 m | (43.6 feet) | 14 mm | (0.55 inch) |
| Clew-outhaul | 13.3 m | (43.6 feet) | 14 mm | (0.55 inch) |
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Swan 56 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.