The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.
The boat is equipped with 8 berths.
The Bavaria 1130 is equipped with a masthead rig. The advantage of a masthead rig is its simplicity and the fact that a given sail area - compared with a fractional rig - can be carried lower and thus with less heeling moment.
The Bavaria 1130 has been built with different keel alternatives.
Fin keel
The Bavaria 1130 is equipped with a fin keel. A boat with a fin keel is more manoeuvrable but has less directional stability than a similar boat with a full keel.
The boat can only enter major marinas as the draft is about 1.89 - 1.99 meter (6.20 - 6.50 ft) dependent on the load. See immersion rate below.
Unknown keel type
The Bavaria 1130 has been equipped with different engine alternatives.
Alternative 1:
Bavaria 1130 may be equipped with an inboard Volvo Penta MD2040 diesel engine at 40 hp (29 kW).
Alternative 2:
The boat may be equipped with an inboard diesel engine at 28 hp (20 kW).
The transmission is a saildrive.
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Bavaria 1130 is 1.87, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Bavaria 1130 is about 261 kg/cm, alternatively 1466 lbs/inch.
Meaning: if you load 261 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 1466 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Bavaria 1130 is 3.27.
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
Usage | Length | Diameter | ||
Jib sheet | 11.3 m | (37.1 feet) | 14 mm | (0.55 inch) |
Genoa sheet | 11.3 m | (37.1 feet) | 14 mm | (0.55 inch) |
Mainsheet | 28.2 m | (92.7 feet) | 14 mm | (0.55 inch) |
Spinnaker sheet | 24.9 m | (81.6 feet) | 14 mm | (0.55 inch) |
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Bavaria 1130 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.