Review of Aluyacht 480
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find an Aluyacht 480 or similar boat for sale
The hull is made of aluminium. Aluminum is strong and forgiving. Where an impact on a fiberglass hull will result in major gelcoat damage and possible cracking, an aluminum hull will probably only have a scratch or a small bend. The only concern is electrolysis. Ensure that you have proper sacrificial anodes installed.
The boat is equipped with 650.0 liter fresh water capacity.
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Aluyacht 480 is 1.72, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.
Aluyacht 480 holds a CE certification:
The boat is by European Union certified as Class A. OCEAN:What is Theoretical Maximum Hull Speed?
The theoretical maximal speed of a displacement boat of this length is 8.9 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Aluyacht 480 is about 405 kg/cm, alternatively 2270 lbs/inch.
Meaning: if you load 405 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 2270 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is Motion Comfort Ratio (MCR)?
The Motion Comfort Ratio for Aluyacht 480 is 38.3.
What is L/B (Length Beam Ratio)?
The l/b ratio for Aluyacht 480 is 3.25.
What is Displacement Length Ratio?
The DL-ratio for Aluyacht 480 is 211 which categorizes this boat among 'light crusers & offshore racers'.
Maintenance
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
| Usage | Length | Diameter | ||
|---|---|---|---|---|
| Jib sheet | 14.6 m | (48.0 feet) | 16 mm | (5/8 inch) |
| Genoa sheet | 14.6 m | (48.0 feet) | 16 mm | (5/8 inch) |
| Mainsheet | 36.5 m | (119.9 feet) | 16 mm | (5/8 inch) |
| Spinnaker sheet | 32.2 m | (105.5 feet) | 16 mm | (5/8 inch) |
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Aluyacht 480 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.