The Almclassic 1415 has been equipped with different engine alternatives.
Alternative 1:
The boat may be equipped with an inboard Vetus Deutz engine at 170 hp (126 kW).
Alternative 2:
The boat may be equipped with an inboard Perkins diesel engine at 135 hp (100 kW). Cruise speed is 12.0 knots. Max speed is 16.0 knots.
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Almclassic 1415 is about 428 kg/cm, alternatively 2399 lbs/inch.
Meaning: if you load 428 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 2399 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Almclassic 1415 is 3.38.
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Almclassic 1415 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.